Single Phase 110 or 220 Volts
Lightweight, portable, single phase submersible pumps are designed to handle water and solids.
Built for the demands of construction, mining, municipality and farm applications.
Features and benefits
- Lightweight, compact design for easy transport and positioning of pump.
- Built-in thermal protection prevents motor damage due to impeller blockage, reducing service repairs.
- Heavy-duty power cord with strain relief resists pullout and abrasion reducing costly repairs.
- Insulation on all conductors of the power cable are protected by a water block system to prevent wicking of water into the motor.
- Silicon carbide faced double mechanical seals run in an isolated oil-filled cavity, allowing for seal lubrication, cooling and overall motor protection.
- Preliminary v-ring or lip seal (depending on model) shields the mechanical seal from abrasive wear due to suspended debris in pumping fluid.
- Semi-vortex impeller allows for optimum wear resistance.
Description | Metric | Inch | ||
Discharge diameter | 80 | mm | 3 | in |
Length x width x height | 240 x 240 x 570 | mm | 9.5 x 9.5 x 22.5 | in |
Operating weight | 28,8 | kg | 63.5 | lb |
Max. head | 21 | m | 69 | ft |
Max. discharge | 420 | l/min | 111 | US gpm |
Max. pressure | 2,07 | bar | 30 | psi |
Solid size capacity | 8,5 | mm | 0.3 | in |
Motor type | Single phase/60 Hz | |||
Voltage | 110 or 220 | V | 110 or 220 | V |
Current (full load/start @ 110V) | 23,0/136 | A | 23.0/136 | A |
Speed | 3.440 | 1/min | 3,440 | rpm |
Max. power output | 1,5 | kW | 2 | hp |
Cable length | 10 | m | 32 | ft |
Cable size | 3,31 | mm2 | 12 | AWG |
Impeller material | Ductile iron | |||
Impeller type | Semi-vortex |
Discounted at only: US$ .00
Niciun comentariu:
Trimiteți un comentariu